[pdf] [/pdf]

1 AWG DLO Cable Extreme Torsion Copper EPR Insulation CPE Jacket RHW 2000 V & RW90 2000 V

Application:

• Suitable for use in static and dynamic wind power applications. For portable and fixed installations leads for motors, generators, batteries. Also as power cable used as DLO Locomotive Cable in railroad and transit car wiring.

Also Known As:

1 AWG DLO Cable, CPE Jacketed, Torsion Copper, 1 AWG EPR Insulated Cable, DLO Cable Extreme, 1 AWG DLO Cable Extreme Torsion.

Standards:

• UL 44
• Rubber Insulated Wires and Cables.
• CSA C22.2 No. 38
• Thermoset Insulated Wires and Cables.
• Recommended Practice RP-588.
• Wire and Cable Insulating Material Per AAR Manual of Standard and Recommended Practices and Locomotive Interchange Equipment.
• ICEA S-95-658/NEMA WC70
• Non shielded 0 – 2000 V Cables.

Features:

• Cable meets the 150 °/m Torsion Test for Wind power Turbine Cable in lieu of the 92 °/m standard test.
• Listed RHH / RHW-2 per UL and RW90 / R90 per CSA.
• Jacket is rated Oil Resistance I or II, UL 44.
• All sizes are rated VW-1.
• Cable is rated Sun Resistance for CT use, and FT4, 1/0 AWG and larger and –40 °C.
Meets vertical flame tests. 70,000 BTU’s:
• UL 1277
• IEEE 383
• ICEA T-30-520
• FT4/IEEE 1202
210 000 BTU’s:
• ICEA T29-520
P-07-KA040015-MSHA

Construction:

• Conductors: Soft annealed uncoated copper conductor, flexible stranding per AAR RP-588, and ASTM B3, B172, B174 as applicable.
• Separator: A suitable opaque tape, as required.
• Insulation: Flame retardant thermoset ethylene propylene rubber (EPR).
• Jacket: Black flame retardant thermoset chlorinated polyethylene (CPE) jacket.

Specifications:

• Size: 1 AWG
• Number of Strands: 224
• Size of Each Strand AWG: 24
• Insulation Thickness (mil): 90
• Jacket Thickness (mil): 45
• Nominal Outside Diameter (In): 0.66
• Approximate Net Weight Copper lb/kft: 433