[pdf] [/pdf]

1 AWG 3C 1G25 Bare Copper Unshielded PVC RG7(O)R 0.6/1 KV Industrial Low Voltage Cable

Allowable Ampacity for 1 AWG 3C 1G25 Bare Copper Unshielded PVC RG7(O)R 0.6/1 KV Industrial Low Voltage Cable: 100 Amps

About:

The 1 AWG 3C 1G25 Bare Copper Unshielded PVC RG7(O)R 0.6/1 KV Industrial Low Voltage Cable is known in the industry as an Industrial Low Voltage Cable or Bare Copper PVC Insulated Cable. This designation reflects its application in industrial environments where reliable, low voltage power distribution is essential. The cable's construction, featuring a solid or stranded red copper conductor and PVC insulation, makes it suitable for various applications including outdoor and indoor settings, even in wet conditions.

Also Known As:

•  1 AWG Single Core Copper
•  Industrial Low Voltage Cable
•  Bare Copper PVC Insulated Cable

Application:

• Power and control use outdoor and indoor applications, even wet. Suitable for fixed installation at open air, in tube or canals, masonry, metals structures, overhead wire and for direct and indirect undergrround wiring

Standards:

• This cable is likely manufactured in accordance with certain industry standards, which might include IEC, ASTM, or local electrical standards. These standards ensure the cable's suitability for industrial applications, safety, and performance.

Construction:

• Conductor: Solid Or Stranded Red Copper Conductor Cl. 1 Or 2, Acc. To Iec 60228
• Insulation: Rubber Type G7
• Colour Cores: Acc. To Din Vde 0293-308, Hd 308 S2 Green-yellow Earth-wire From 3 Cores
• Wrapping: Not Fibrous And Not Hygroscopic Filler
• Outer Sheath: Grey (Ral 7035), Pvc Type Rz

Features:

• UNEL TABLES 35357 - 35376 - 35377
• EN 60332-1-2 CEI 20-22II comparable to IEC 60332-3-22

Specifications:

• AWG No: 1
• No.of cores x cross section n x mm2: 3x50+1G25
• Outer-Ø ca.mm ± 10%: 31,1
• Copper weight kg/km: 1680
• Nominal voltage: Uo/U 0,6/1 kV
• Test voltage: 3,5 kV
• Temperature range: - 15 o C up to + 90 o C
• Max short circuit temperature: for sections up to 240 mm2: + 250 °C, for sections over 240 mm2: + 220 °C
• Min. bending radius: 6 x d
• Max. tensile stress: during installation: 50 N/mm2 , static stress: 15 N/mm2
• Cable weight approx. kg/km: 2200
• Part Number: 46060G82035M65